The paradox in one table
On 13 November 2026, Mysteel's headline seaborne index for 62% Fe Australian fines settled at $92.40/dmt CFR Qingdao, up 5 cents on the day. That is a remarkably calm print for a market that is, on the physical side, visibly oversupplied.
| Indicator (13 Nov 2026) | Level | Weekly change |
|---|---|---|
| 62% Australian fines (forward index) | $92.40/dmt | +$0.05 d/d; –$2.70 y/y |
| 65% Brazilian fines | $105.60/dmt | flat; –$3.05 y/y |
| 58% high-alumina fines | $76.65/dmt | +$0.05; –$2.20 y/y |
| 47-port imported ore stocks | 177.59 Mt | +2.26 Mt |
| 45-port imported ore stocks | 168.92 Mt | +1.88 Mt |
| Daily hot metal output | 2.3032 Mt/day | –0.037 Mt |
| Global iron ore shipments | 29.91 Mt | (weekly) |
| 47-port arrivals | 27.64 Mt | (weekly) |
Sources: Mysteel daily index release, 13 Nov 2026; Mysteel weekly iron ore report, 6–13 Nov 2026.
The weekly report's own arithmetic is unambiguous: prices fell over the week (the 61% forward index dropped $3.00 to $90.30/dmt), inventories built for a third consecutive week, and hot metal output declined for a fifth. Mysteel's forward guidance is for shipments to recover, arrivals to ease, hot metal to fall further and port stocks to keep accumulating — with prices "rangebound at low levels."
Why prices are not falling harder
A 177.6 Mt port stock position against roughly 3.2 Mt/day of port offtake implies about 55 days of cover at the ports alone. Add mill-side imported ore stocks of 85.1 Mt against daily consumption of 2.82 Mt and the surveyed chain holds roughly 93 days of inventory. (These are my calculations from Mysteel's reported components, not Mysteel figures.) By any historical standard that is a heavy surplus.
Three things are absorbing it:
- The cost floor. Mysteel's sinter survey puts average ex-tax hot metal cost at RMB 2,456/t, down only RMB 7 week on week. At current rebar and hot-rolled coil realisations (RMB 3,035/t and RMB 3,179/t on the January contracts), margins are thin but not deeply negative — so mills have not been forced into the aggressive de-stocking that would break the price.
- Expectations of restocking. Chinese mills typically build ore inventory ahead of winter and the Lunar New Year. Mysteel's own analyst view — that prices bottom near $85 and rebound above $90 on restocking — is itself a support mechanism, because it discourages panic selling.
- Supply discipline at the top end. Global shipments of 29.91 Mt are down sharply from 35.48 Mt the prior week. That is partly seasonal (Australian cyclone and Brazilian wet-season risk), but it matters for the near-term balance.
The real signal: grade and brand spreads are widening
The headline index hides the more interesting development. Look at the floating premiums Mysteel published the same day (US$/dmt):
| Brand / product | Premium | Change |
|---|---|---|
| Newman fines | –0.40 | flat |
| Jimblebar fines | –3.10 | flat |
| MAC fines | –0.05 | +0.05 |
| BRBF | 0.00 | flat |
| Carajas fines | +0.50 | flat |
| 62.5% Australian lump premium | $0.203/dmtu | flat |
The 62%/65% spread at $13.20/dmt is close to its monthly average of $13.52, but the 62%/58% spread of $15.75/dmt is now wider than the monthly average of $15.95 — meaning the discount for high-alumina, lower-grade ore has been narrowing slightly, not widening. That is a subtle but important tell: when steel margins compress, mills normally push toward higher-grade, lower-alumina blends to protect productivity. The fact that they are not doing so aggressively suggests either that margins are not yet painful enough, or that availability of premium grades (Carajas, PB) is adequate.
The Jimblebar discount of $3.10/dmt is the standout. That is a persistent, structural penalty for a mid-grade Pilbara product, and it reflects the alumina penalty that Chinese sinter plants apply when the 58% high-alumina index is trading at a $15.75 discount to benchmark.
Scrap: the canary
The most under-reported item in the Mysteel aggregation is Shagang's RMB 30/t cut to scrap purchase prices — heavy scrap No.3 to RMB 2,330/t and furnace-grade No.1 to RMB 2,410/t, both tax-inclusive. Mysteel notes the 2026 cumulative change is zero, i.e. flat versus late December 2025.
That flatness is the story. Scrap prices have gone nowhere all year even as iron ore fell and hot metal costs eased. The scrap-to-hot-metal spread has therefore compressed, which is precisely the condition under which Chinese EAF mills lose share to blast furnaces. Mysteel's own scrap commentary puts the national average at RMB 1,979/t and notes the iron-scrap price gap has narrowed to RMB 76/t — historically a level at which scrap loses competitiveness in the converter and EAF alike.
For anyone watching the decarbonisation narrative in Chinese steel, this matters: a flat scrap market alongside falling ore prices is a quiet headwind to EAF economics, and it helps explain why hot metal output, while falling, is not collapsing.
What to watch
- The 47-port inventory trajectory. Three consecutive weekly builds of this size (2.26 Mt, 2.44 Mt, 0.14 Mt before that) is a trend, not noise. If shipments recover as Mysteel expects while hot metal keeps falling, a 180 Mt print is plausible within weeks — a level that historically forces distressed selling.
- The 61% vs 62% index divergence. The 61% index at $90.30 and the 62% at $92.40 imply a $2.10 grade differential. Watch for that gap to widen if mills do eventually shift toward higher-grade blends.
- Shagang's next move. A single RMB 30/t cut is marginal; a sustained sequence would signal that EAF margins are breaking and that scrap supply is loosening faster than ore.
- The cost floor at RMB 2,456/t hot metal. If that falls materially, the support beneath ore prices falls with it.
Bottom line
The November 2026 iron ore market is not a crash — it is a slow grind. The 62% index is down only $2.70 year on year despite a port inventory that has grown 12.9% y/y (per Mysteel Global's reading of the same data). That resilience is being bought with falling hot metal output and a scrap market that has gone nowhere all year. The next leg will be decided not by the headline number but by whether Chinese mills blink first on restocking, or whether the surplus simply overwhelms the cost floor.
Source & methodology +
MetalMate separates original-source evidence from summary and analysis. Verify the original source before procurement, legal or engineering decisions.
- Article status
- Published · Version 1
- Source date
- Not supplied
- MetalMate publication
- 17 November 2026
- Verification
- Automated evidence checks; not human reviewed
铁矿石11月份 — Mysteel / 我的钢铁网
MetalMate provides an English summary; consult the original wording.
