Primetals Technologies confirmed on 4 November that Nucor has produced the first prime coil on the new continuous galvanizing line at its Berkeley sheet mill in Huger, South Carolina — the point at which commissioning is declared complete and commercial production begins. The line is rated at roughly 500,000 t/y and is designed for exposed automotive-quality sheet, advanced high-strength steels (AHSS) and a coating portfolio spanning galvanized (GI), galvannealed (GA) and zinc-aluminium-magnesium (Zn-Al-Mg).

The milestone itself is routine; almost every new CGL eventually makes saleable coil. What matters is the timing and the product mix. This is Nucor's bid to move from a marginal supplier of commodity coated sheet into the outer-panel and structural-AHSS tier of the automotive supply chain, and it lands in a US market where coated flat capacity is being added by several producers at once.

What the line actually is

The capability claims are the substance of the announcement, not the coil. Exposed automotive quality — outer body panels — is the most demanding specification in flat-rolled steel: surface cleanliness, flatness, coating adhesion and formability all have to hold at automotive PPAP standards, and the customer qualification cycle runs 12–24 months beyond first coil.

The process kit explains how Primetals intends to get there:

TechnologyFunction
Vertical furnace, radiant-tube + direct-fired sections with MID burnersCombined heating with controlled atmosphere; Primetals says this is the first US application of its in-house MID combustion system
Transverse Flux Induction Heating (TFIH)Fast, precise strip heating ahead of the pot, enabling tight annealing cycles for AHSS grades
Rapid CoolingHigh cooling rates to lock in the multiphase microstructures (DP, TRIP, MS) that define AHSS properties
Galvanneal capability and after-pot cooling/quenchGA product for automotive closure panels; Zn-Al-Mg for corrosion-critical exposed parts

The consortium is worth noting for procurement watchers: Primetals (a Mitsubishi Heavy Industries company) led with process engineering, furnace, automation and power distribution, while France's Clecim supplied key mechanical equipment including terminal gear. The line also drew on teams from the US, Japan and India, with local pre-assembly at Primetals' Huger service workshop — an increasingly common model for large greenfield equipment packages.

The schedule slipped; the budget apparently did not

Nucor's board approved the line in September 2022 at a stated cost of USD 425 million, with start-up "expected in mid-2025." The order to Primetals in March 2023 repeated mid-2025 for first coil. Nucor's own Q1 2025 investor material later pointed to mid-2026 completion, and the first coil was actually galvanized in October 2026, with prime coil declared in early November.

That is a slip of roughly 17 months against the original target, and 4–5 months against the revised one (my arithmetic from the stated dates). Management described the project as "on time and on budget" against the revised plan on the Q3 2026 call, per trade reporting. Readers should treat that as a claim about the re-baselined schedule rather than the 2022 plan — a distinction that matters when assessing Nucor's project-delivery record across its wider sheet and structural investment programme.

The commercial question: ramp-up into a crowded niche

The more consequential detail is the ramp curve. Nucor has guided to roughly 50% utilisation on the Berkeley automotive CGL by mid-2027 and full production by end-2027. Translated into tonnage, that implies something like 250,000 t of annualised output by mid-2027 rising toward the full 500,000 t rate by year-end — and, on a simple averaging assumption (not a company figure), perhaps 250,000 t of incremental coated supply across calendar 2027.

Three things shape whether that tonnage clears at automotive-grade premiums:

  • Qualification, not capacity, is the binding constraint. Exposed-panel business requires OEM and Tier 1 approval per grade and per part. Nucor's existing galvanizing footprint at Hickman and Gallatin gives it a running start on GA and GI relationships, but outer-panel and AHSS structural awards are a different conversation with a different qualification clock.
  • The US coated flat market is filling up. Nucor's own Berkeley line joins a wave of galvanizing capacity additions across the US flat-rolled sector in recent years. Coated product has been the premium end of the US sheet market largely because supply was tight; incremental capacity across multiple producers compresses that premium over time.
  • Auto build rates are the swing factor. North American light-vehicle production has been soft relative to installed capacity, and steel demand per vehicle is under simultaneous pressure from lightweighting (aluminium, polymers) and support from the growing AHSS content of body-in-white structures. The net effect is roughly flat steel intensity per vehicle, which means the coated-sheet market grows with build rates, not with intensity.

The line is strategically coherent — Nucor has been explicit since 2022 about shifting mix toward higher-margin, value-added products and growing automotive and consumer-durables exposure. But it is a mix-shift argument, not a volume-growth argument. The value accrues only if the grades qualify and the premiums hold.

What to watch

  • Customer announcements. OEM or Tier 1 nominations for Berkeley-supplied exposed or AHSS grades would be the real confirmation; first prime coil is an equipment milestone, not a commercial one.
  • The Q4 2026 and Q1 2027 calls. Watch for utilisation commentary against the 50%-by-mid-2027 marker and for any shift in the end-2027 full-production target.
  • US coated flat pricing spreads. The HDG-to-HRC premium is the cleanest read on whether the new capacity is being absorbed at healthy margins or is starting to compete on price.
  • Zn-Al-Mg uptake in North America. Nucor is adding a coating product that is well established in Europe and Asia but still small in US automotive specifications; success here would be a genuine differentiator rather than a me-too coating line.

References

  • Primetals Technologies, "Nucor Produces First Prime Coil on Continuous Galvanizing Line Supplied by Primetals Technologies," 4 November 2026.
  • SteelOrbis, "Nucor produces first prime coil at new Berkeley galvanizing line," 6 November 2026.
  • AIST Steel News, "Nucor Begins Production on Primetals Technologies-Supplied CGL," 4 November 2026.
  • AIST Steel News, "Nucor Reports First Heats at West Virginia Mill and First Coils on New Galv Line," 29 October 2026.
  • Nucor, "Nucor to Construct Two Flat-Rolled Galvanizing Lines," 28 September 2022.
  • Primetals Technologies, "Nucor Steel Berkeley selects Primetals Technologies for new galvanizing line," 29 March 2023.
  • SSG Events, "Nucor Steel Berkeley rolls the first coil off galvanizing line No. 2 at Huger," 5 November 2026.
  • Nucor Q1 2025 Earnings Call Presentation, 29 April 2025.
  • Benzinga, Nucor Q3 2026 Earnings Call Transcript, October 2026.
Source & methodology +

MetalMate separates original-source evidence from summary and analysis. Verify the original source before procurement, legal or engineering decisions.

Article status
Published · Version 1
Source date
6 November 2026
MetalMate publication
7 November 2026
Verification
Automated evidence checks; not human reviewed

Nucor produces first prime coil at new Berkeley galvanizing line — SteelOrbis