China's October finished steel exports came in at 9.854 million mt, down 6.1% month on month but up 0.74% year on year, according to General Administration of Customs (GACC) data released on 10 November. The cumulative January–October total of 95.495 million mt is 2.3% below the same period of 2025. Imports continued to shrivel: 4.461 million mt in ten months, down 11.6% year on year, with October alone at 395,000 mt — down 19.7% MoM and 21.5% YoY.

The trade press immediately attached a policy cause: China's export licensing regime for steel products, in force since 1 January 2026, "exerting a negative impact on finished steel exports." That framing deserves scrutiny, because the export data do not support a simple causal story.

What the numbers actually show

The month-on-month fall to 9.854 Mt is the first sub-10 Mt print since March and ends a five-month run above that threshold — September, at roughly 10.49 Mt, was the fifth consecutive month above 10 Mt. But the YoY comparison is essentially flat, and the cumulative decline actually narrowed from −2.6% in January–September to −2.3% in January–October. If a licence regime were biting hard, the cumulative gap should be widening, not closing.

The arithmetic is internally consistent, which is worth confirming before building an argument on it:

MetricValue (million mt)
Jan–Oct 2026 exports95.495
October 2026 exports9.854
Implied September 2026 exports10.492
Implied Jan–Sep total85.641 (matches October's release)
Implied October 2025 exports~9.93
Implied Jan–Oct 2025 base~97.74
Jan–Oct 2026 net export volume91.03

All figures from GACC via SteelOrbis and Mysteel; implied values are MetalMate calculations from reported data.

The other important point is the level. Ten months at 95.5 Mt put China on a full-year run-rate of roughly 114–115 Mt — the second-highest annual volume on record, behind only 2025's 119.02 Mt (a record that exceeded the 2015 peak of 112.4 Mt). China is still exporting more steel than in almost any previous year in its history, licence regime and all.

The October dip: seasonality is the better explanation

October 2026 follows a September that was itself exceptionally strong, and October's working-day count is compressed by the National Day holiday week (1–8 October). October 2025 was also a sub-10 Mt month (approximately 9.93 Mt by reverse calculation), which is consistent with the same seasonal pattern. A 6.1% MoM retreat from an unusually high base, in a holiday-shortened month, with a flat YoY print, is weak evidence of a policy-induced export slowdown.

The licence regime may be having an effect — but on composition and compliance more than on aggregate volume. The mechanism ("one licence, one code," six-month validity not crossing calendar years, exporter-applied, requiring an export contract and a manufacturer quality certificate) is designed to raise the cost and friction of shipping marginal, low-value tonnage. That is more likely to show up in product mix, unit values and the share of tonnage going through trading companies than in a step change in monthly totals.

One data point supports this reading: the average export price in January–September was US$709.4/mt. If October's unit value holds or rises, the licence regime is doing what a value-focused policy would want — discouraging volume growth while defending price — rather than shrinking the export book outright.

Why the policy story matters anyway

The Beijing's motive is not mystery. CISA vice-chairman Luo Tiejun warned in December 2025 that low-priced volume pushes were triggering a wave of overseas anti-dumping and safeguard cases, calling prolonged low-price exporting "unsustainable." The licence regime is the administrative expression of that concern: a tool to monitor and moderate export flows before trade remedies do it more painfully.

That logic remains the key risk for buyers outside China. Even at 114–115 Mt, Chinese exports are running at near-record levels, and the marginal tonnage is precisely the low-value, high-friction product that attracts duties. The October print does not signal an export retreat; it signals a plateau at a very high level, with the policy toolkit poised to shape what ships rather than how much.

For Southeast Asian and other importing markets, the practical implication is that supply availability from China is unlikely to tighten materially through year-end. For Chinese mills, the pressure points are increasingly administrative (licence processing, quality-certificate paperwork) and commercial (unit value, trade-remedy exposure) rather than raw volume. The licence regime's first year has not shrunk the export book — it has changed its shape.

Imports: an afterthought, but a telling one

Finished steel imports of 4.461 Mt in ten months (down 11.6%) and just 395,000 mt in October confirm a market effectively closed to foreign suppliers and entirely oriented toward export. The 21.5% YoY collapse in October imports likely reflects both weak domestic demand and the difficulty of competing with domestic prices — a dynamic that, in turn, keeps the export surplus (91 Mt net over ten months) structurally large.

Bottom line: The October export decline is a seasonal blip at a near-record annual run-rate, not evidence that the export licence regime is compressing Chinese steel exports. The regime's effect is more plausibly on product mix, unit value and compliance than on aggregate tonnage — and at 114–115 Mt, China's export book remains close enough to its all-time high to keep trade-remedy risk firmly on the table for 2027.

Source & methodology +

MetalMate separates original-source evidence from summary and analysis. Verify the original source before procurement, legal or engineering decisions.

Article status
Published · Version 1
Source date
10 November 2026
MetalMate publication
10 November 2026
Verification
Automated evidence checks; not human reviewed

China's steel exports down 2.3% in Jan-Oct, down 6.1% in Oct from Sept 2026 — SteelOrbis